Easy to Install Ice Block Machine with Stable Water and Power System for Ice Businessmen

    We ice block machine is very easy to install .You only need to connect water and power ,the machine can work. So how to install ice machine and water and power system installation.The following is very clear:

   Ice machine installation

⑴ The machine should be placed in air circulation, surrounded by a safe and clean place. 

⑵ machine should not be exposed to the weather, not subject to direct sunlight and rain. Four weeks is not near a heat source. 

⑶ machine environment can not be lower than 5 ℃, not higher than 38 ℃. 

⑷ around the machine should have enough space, especially the back can not be less than 150mm. For machine cooling. 

⑸ adjust the bottom of the machine to ensure the machine ground screw placement levels stable. 

   Water systems installation 

⑴ Please connect comply with local drinking water standards. 

⑵ connected to the filter when necessary, in order to improve the drinking water standard.

⑶ water system must meet the following conditions: 

a, the lowest temperature 2 ℃, the maximum does not exceed 38 ℃ 

b, the lowest pressure 0.02Mpa, the maximum 0.8Mpa 

   Power installation 

⑴ power must be on the same machine nameplate consistent. 

⑵ All lines must meet national standards. 

⑶ must be reliable grounding wire must meet electrical standards. 

⑷ voltage fluctuations must not exceed the rated voltage of ± 10%.